What Size Furnace Do I Need? BTU by Square Footage and Climate
A 2,000 sq ft home needs roughly 60,000 to 120,000 BTU of heat depending on climate. Here is a sizing chart and how AFUE changes the furnace you buy.
A 2,000 sq ft home needs roughly 60,000 to 120,000 BTU of heat depending on climate. Here is a sizing chart and how AFUE changes the furnace you buy.
Size a tank water heater by its first hour rating, not just its gallons, and a tankless heater by flow rate and temperature rise. Here is the DOE method.
A 20 amp circuit needs at least 12 AWG copper, and longer runs often need 10 AWG. Here is how ampacity and voltage drop decide the right wire size.
A home using 900 kWh a month in a location with 4.5 peak sun hours needs about an 8.2 kW system, or 21 panels of 400 W. Here is the formula and a chart.
A 150–250 sq ft room needs about 6,000 BTU, and a 450–550 sq ft room about 12,000 BTU. Here is the full chart and the adjustments that matter.
Divide the deck width by the board width plus gap to get rows, then multiply by the deck length. A 12 × 16 deck needs 29 boards of 16 ft. Chart inside.
Divide the fence length by the post spacing, round up and add one. Here is how corners, gates and different spacings change the count, with examples.
Roof pitch is the rise in inches for every 12 inches of run. Here are four ways to measure it, including from the attic, and a pitch-to-degrees chart.
One roofing square is 100 sq ft. Measure the house footprint with overhangs, multiply by the pitch factor and divide by 100. Chart and examples inside.
Count strips, not square feet. Here is the decorator’s method for working out wallpaper rolls, how pattern repeat changes it, and a strips-per-roll chart.
A 12 × 12 ft room with 8 ft walls needs 14 sheets of 4 × 8 drywall for the walls, or 19 with the ceiling. Here is the formula, a chart and material estimates.
A 12 × 12 ft room with 8 ft walls needs about 2 gallons of paint for two coats. Here is the formula, a chart for common room sizes and coverage tips.