Home › Cost Estimators › Fence Cost Calculator
This fence cost calculator estimates the installed price of a new fence from its length and material. It applies typical US price ranges per linear foot for wood picket, chain link, composite, vinyl and wrought iron fences, and lets you compare with a contractor’s quote.
How to Use the Fence Cost Calculator
- Measure the total length of the fence line in feet.
- Choose the fence material.
- Optionally enter a quoted price per linear foot to compare.
Fence Cost per Linear Foot
| Material | Typical installed cost per linear foot |
|---|---|
| Picket (wood, vinyl or metal) | $5–$30 |
| Chain link | $8–$40 |
| Composite | $11–$45 |
| Vinyl | $15–$40 |
| Wrought iron | $25–$55 |
Angi reports that most professionally installed fences average about $15–$25 per linear foot, as cited by NerdWallet. Height, style and terrain move the price within each range.
Example
A 150 ft vinyl fence at $15–$40 per linear foot costs roughly $2,250–$6,000 installed, with a mid-range estimate of about $4,100.
How to Measure Your Fence Line
- Measure each side of the area you want to enclose and add them together.
- Leave out sections where the house or an existing wall closes the gap.
- Count gates separately; they usually cost more than a standard section.
- Confirm the property line before you finalize the length.
What Changes the Price
- Fence height: a 6 ft privacy fence costs more than a 4 ft picket fence.
- Gates, posts and hardware.
- Sloped or rocky ground and removal of an old fence.
- Local permits and HOA requirements.
- Material grade, such as cedar versus pressure-treated pine.
Building it yourself? The fence calculator counts posts, rails, pickets and concrete.
Sources for Cost Data
Prices are national ranges and change over time. Labor rates, materials and permit fees vary widely by region, so use these figures for budgeting and always compare several local quotes.
Frequently Asked Questions
How much does a fence cost per foot?
National guides report roughly $5–$30 per linear foot for picket fences, $8–$40 for chain link, $15–$40 for vinyl and $25–$55 for wrought iron, installed.
How much does a 100 ft fence cost?
At the commonly cited average of $15–$25 per linear foot, a 100 ft fence costs about $1,500–$2,500, though material and height can push it higher.
What is the cheapest type of fence?
Chain link and basic wood picket fences are usually the least expensive per linear foot.
Do fences need a permit?
Many areas require a permit for fences above a certain height. Check with your local building department and HOA.
Related Calculators
Browse all home improvement cost calculators or see every tool on our home page.